Unvented hot water cylinders in Winchburgh
Installation, annual servicing and repairs on unvented cylinders in Winchburgh. Mains pressure hot water with no tank in the loft, fitted by G3 qualified engineers.
- Book online in minutes
- Instant booking confirmation
- Track your engineer on the way
What we do with unvented cylinders
Installed, serviced and repaired by engineers qualified to work on them.
Cylinder installation
Replacing a vented cylinder or a tired unvented one, or converting from a tank in the loft. Sized to your bathrooms and your mains flow rather than guessed.
Get a quote →Annual servicing and testing
Unvented cylinders must be checked every year by a qualified engineer. Expansion vessel, pressure settings, the temperature and pressure relief valve and the discharge pipework all tested and recorded.
Book a service →Repairs
Leaking, dripping outside, no hot water, pressure dropping or water hammering. A repair visit is £120 inc VAT.
Book a repair →Advice on what suits
Not sure whether an unvented cylinder, a combi or a heat pump cylinder is right for your house? We check the mains flow and tell you straight.
Ask us →What an unvented cylinder is, and why people fit them
An unvented cylinder stores hot water at mains pressure, fed straight off the incoming main. There is no cold water tank in the loft, so nothing to freeze in January, nothing filling and gurgling at night, and no loss of pressure upstairs because gravity ran out.
The practical difference is the shower. With a vented system the pressure depends on how far the tank sits above the tap. With an unvented cylinder it is mains pressure at every outlet, which is why they suit houses with two bathrooms or an en suite, and why they are the usual answer when someone converts a loft.
They are not right for every house. If your incoming mains flow is poor, an unvented cylinder cannot make water that is not there, and we will tell you that before you spend anything. We measure the flow and pressure at the survey rather than assume.
We are in Winchburgh every day, and many of the village's newer homes have unvented cylinders that need their annual service.
| Unvented cylinder | Vented with a loft tank | |
|---|---|---|
| Hot water pressure | Mains pressure at every tap | Depends on tank height |
| Tank in the loft | None | Cold tank, and usually a header tank |
| Freezing risk | None in the loft | A real one in a Scottish winter |
| Two bathrooms at once | Usually fine | Often struggles |
| Needs good mains flow | Yes | No |
| Annual service required | Yes, by a qualified engineer | No legal requirement |

Why the annual service is not optional
An unvented cylinder is a sealed vessel of hot water held at mains pressure. If the controls failed, the water could overheat, which is why the safety devices matter. They're also the parts that wear.
Building regulations require the work to be done by a qualified engineer, manufacturers require an annual service for the guarantee, and a landlord who skips it has a problem if anything happens. The service checks the expansion vessel charge, the pressure reducing valve, the temperature and pressure relief valve, the expansion relief valve, the thermostat and cut out, and that the discharge pipework runs where it should.
The most common thing we find is a flat expansion vessel, which shows up as water dripping from the outside discharge pipe and pressure that climbs when the cylinder heats. Left alone it wears the relief valve out, and then you have a leak rather than a drip.
Cylinder faults we repair
A repair visit is £120 inc VAT. Parts are quoted before they are fitted.
Water dripping outside
A pipe outside dripping after the hot water heats usually means a flat expansion vessel or a failed relief valve. The system is protecting itself, but it will not fix itself.
Book a repair →No hot water
Immersion, thermostat, cut out or a boiler side fault. We check which before anything gets replaced.
Book a repair →Pressure dropping or surging
The pressure reducing valve or the expansion vessel. Both are serviceable parts rather than a new cylinder.
Book a repair →Leaking cylinder
A leak from a fitting or valve is a repair. A leak from the vessel itself is a replacement, and we will tell you which it is.
Book a repair →Banging or water hammer
Usually a valve or the vessel charge, and it is worth fixing before it works a joint loose.
Book a repair →Hot water running short
Either the cylinder is undersized for the house or the coil or immersion is not heating it properly.
Book a repair →Most cylinder faults are a valve or an expansion vessel rather than a new cylinder. We tell you which it is, and if replacement genuinely is the better answer we price that too.
Cylinder leaking or dripping?
Book a repair visit online and pick a slot. The engineer finds the cause and prices any parts before fitting them.
Turn off the mains stop tap and switch the immersion and boiler off, then call us. A drip from the outside discharge pipe is the system working as designed, so it is not an emergency, but it does need looking at.
Qualified to work on them
Unvented hot water is notifiable work. An unvented cylinder should only be installed and serviced by an engineer with the unvented hot water qualification, often called G3, and Building Standards expect the installation to be notified.
We hold the unvented qualification alongside Gas Safe registration, the water regulations certificate and our heat pump and F-Gas tickets. That means one visit can cover the cylinder, the boiler or heat pump feeding it and the pipework around it, rather than three trades blaming each other.
Cylinders for heat pumps
A heat pump needs a cylinder with a much larger coil than a boiler does, because it heats water more slowly at a lower temperature. Fitting a standard cylinder to a heat pump is one of the more common reasons a system never quite delivers.
We service and repair heat pump cylinders as part of our heat pump servicing, and if you are thinking about a heat pump later, we will tell you whether the cylinder you have now would suit it.
Unvented cylinder work in Winchburgh, backed by 400+ five star reviews
Rated Excellent on Google, Trustpilot, Fife Trusted Trader and Facebook.
Every review is from a real local customer. Here's why.
Unvented cylinder questions in Winchburgh
What is an unvented hot water cylinder?
A cylinder that stores hot water at mains pressure, fed straight from the incoming main. There is no cold water tank in the loft, and you get mains pressure hot water at every tap.
Do I need a cold water tank with one?
No. That is the point of them. The cylinder is fed directly by the mains, so the loft tanks can usually come out.
How often does an unvented cylinder need servicing?
Every year, by a qualified engineer. It is a manufacturer requirement for the guarantee and it is what keeps the safety devices working. The expansion vessel, the relief valves and the pressure settings are all checked and recorded.
What does it cost to repair one?
A repair visit is £120 inc VAT. If we fix it on the visit, that's all you pay. Parts are quoted before they are fitted. Most cylinder faults are a valve or an expansion vessel rather than a new cylinder.
Why is water dripping from a pipe outside my house?
Usually the discharge from an unvented cylinder, and usually a flat expansion vessel or a failed relief valve. The system is protecting itself. It is not an emergency, but it needs fixing before the valve wears out.
Is an unvented cylinder suitable for every home?
No. It needs good mains flow and pressure coming into the house. We measure both before quoting, and if your mains cannot support one we will say so rather than fit it anyway.
Can I replace an old vented cylinder with an unvented one?
Usually yes, and it is one of the most common upgrades we do. It means removing the loft tanks, altering the pipework and fitting the safety and discharge pipework correctly.
Does it work with a system boiler or a heat pump?
Yes to both. A heat pump needs a cylinder with a larger coil, so the cylinder has to be matched to the heat pump rather than reused from a boiler system.
Who is allowed to work on an unvented cylinder?
Only an engineer holding the unvented hot water qualification, often called G3. It is notifiable work, and it is not something to let a general handyman touch.
Do you cover all of Winchburgh?
Yes. We cover the whole of Winchburgh (EH52 postcodes), along with South Queensferry, Dalmeny and North Queensferry. Enter your postcode when you book online and you will see the slots available.
My new build has an unvented cylinder. Does it need servicing?
Yes, every year. The manufacturer guarantee depends on it, and many new build owners do not realise the cylinder needs its own check alongside the boiler.
Who looks after my Winchburgh cylinder once the builder's warranty ends?
We can. The yearly check and any repairs are done by our unvented-qualified engineers.
Can I add a second shower to my Winchburgh new build with an unvented cylinder?
Usually, yes. Unvented cylinders run more than one outlet at mains pressure. We check the cylinder size against how you will use it.
More questions? See our frequently asked questions, or call the office on 01383 660098.
Homes and heating in Winchburgh
Winchburgh was a shale oil village and is now growing fast, with 3,450 new homes approved.
The shale oil rows
Craigton Place, Midhope Place, Abercorn Place, Castle Terrace, Oakbank Place and Hopetoun Place were built around 1902 to 1910 for oil workers. All still stand, now modernised.
New build estates
Developments including Oakbank, Millgate Lawns, Central Square, Winchburgh Grange and Burnbrae Meadow have boilers still inside their manufacturer guarantee.
Keeping the guarantee
A new build boiler still needs a yearly service by a Gas Safe engineer to keep its guarantee valid. The builder's warranty does not cover it.
Unvented cylinders in Winchburgh
Many of Winchburgh's new build homes with two bathrooms have a system boiler and unvented cylinder.
New build cylinders
An unvented cylinder needs checking every year to keep its guarantee valid.
Builder's warranty
If a fault happens in the first years, check what the builder's warranty covers first.
The older rows
Homes in the shale oil rows mostly have combis.
Guides that might help
Plain answers to the questions we get asked most.
- Water dripping from a pipe outside? Check your unvented cylinder
- Combi or system boiler: which one suits your home?
- Hot water but no heating? What to check before you call
- No hot water? Common causes and quick fixes
Every price we charge is on Our Rates, VAT included.
Other services in Winchburgh
Everything else we do in Winchburgh.
- Boiler servicing in Winchburgh
- Boiler repairs in Winchburgh
- Boiler cover in Winchburgh
- New boilers in Winchburgh
- Plumbers in Winchburgh
- Power flushing in Winchburgh
- Smart thermostats in Winchburgh
- Landlord gas safety certificates in Winchburgh
- Landlord boiler cover in Winchburgh
- Heat pump servicing in Winchburgh
- Air conditioning in Winchburgh
Unvented cylinder work in Winchburgh and nearby
We cover Winchburgh along with South Queensferry, Dalmeny and North Queensferry, from our office in Dunfermline. Book online, or see unvented cylinder work across Dunfermline and Fife.
Book a cylinder visit in Winchburgh
- Book online
- theheatnetwork.co.uk/book
- Phone
- 01383 660098
- Message us a photo
- hello@theheatnetwork.co.uk
- Office
- Scotia House, 5 Dickson Street, Dunfermline, KY12 7SL
- Hours
- Mon to Fri, 9am to 5pm








