Power flushing in Dalgety Bay
Radiators cold at the bottom, a noisy boiler or dirty water when you bleed a radiator all point to sludge. We clean the whole system, from £500 with a five year sludge-free guarantee, in Dalgety Bay.
- Book online in minutes
- Instant booking confirmation
- Track your engineer on the way
What a power flush actually does
Over the years the water in a heating system picks up rust and scale from the inside of the radiators and pipework. It settles as a black sludge in the bottom of radiators, in the pump and in the boiler's heat exchanger. Radiators stop heating properly, the boiler works harder and parts fail early.
A power flush connects a flushing machine to the system, adds a cleaning chemical, and pushes water through every radiator and pipe at a rate the normal pump cannot manage, breaking the sludge loose and carrying it out. We agitate each radiator in turn, flush until the water runs clean, then dose the system with inhibitor and fit a magnetic filter to stop it building up again.
It is not a quick rinse. A proper flush on a family house takes most of a day, and the difference is radiators that are hot from top to bottom.
Dalgety Bay is one of our main areas, a short drive from our Dunfermline office, and we flush heating systems in homes right across the town.

How we clean a system
Every power flush uses both machines together, the ThoroughFlush and MagnaCleanse magnets in line.

ThoroughFlush
The ThoroughFlush connects to the system in place of the circulator, drives cleaning chemical through every radiator at high velocity, and reverses flow to shift sludge that has packed into the bottom of the panels. Each radiator is isolated and agitated in turn and flushed to drain until the water runs clear.
MagnaCleanse magnets
At the same time, ADEY's MagnaCleanse magnets sit in line on the flushing circuit and pull iron oxide out of the water as it circulates. We clear them as they fill.
The job ends the same way every time: the system dosed with inhibitor, the water tested and recorded, and a magnetic filter on the return if you add one for £175.
Power flush prices
Priced by the number of radiators, so you know the figure before we come out. The base price covers a house with up to five radiators, the system flush, the chemicals, inhibitor and the water test. Confirm the radiator count when you book and the price is fixed.
| Power flush | Included | Price inc VAT |
|---|---|---|
| Up to 5 radiators | Full system flush, chemicals, inhibitor, water test, 5 year sludge-free guarantee | £500 |
| Each extra radiator | Flushed and agitated in turn | £40 |
| MagnaClean Pro2 filter | Can be added. Fitted on the return and cleaned at every service | £175 |
| Microbore pipework | Extra time for 8mm and 10mm systems | £75 |
A twelve radiator house with a filter fitted is £955. Radiators that are blocked solid or corroded through cannot be recovered by flushing and are quoted for replacement on the day, before any work.
Five year sludge-free guarantee
Every power flush comes with a five year sludge-free guarantee. If sludge comes back and cold spots return within five years, we come out and flush again at no charge.
The condition is an annual boiler service, because that is when the filter is cleaned and the inhibitor level checked. A Home Care plan includes the service, so most customers put the two together.

Power flushing in Dalgety Bay, backed by 400+ five star reviews
Rated Excellent on Google, Trustpilot, Fife Trusted Trader and Facebook.
Every review is from a real local customer. Here's why.
Not sure if you need a flush?
Bleed a radiator into a white cup. Black or brown water means sludge. Book a power flush online with the number of radiators, or ask on WhatsApp or the website chat, any time.
Every boiler we install already includes a system flush and a Worcester Greenstar magnetic filter, so you do not need to book this separately. Ask when you get your quote.
Frequently asked questions about power flushing in Dalgety Bay
How much does a power flush cost?
From £500 inc VAT for a house with up to five radiators, plus £40 for each extra radiator. A magnetic filter can be added for £175 and microbore pipework adds £75. The price is fixed once you confirm the radiator count.
How do I know if I need a power flush?
Radiators cold at the bottom and warm at the top, a boiler that bangs or kettles, black water when you bleed a radiator, or rooms that never warm up. Bleeding a radiator into a white cup is the quickest test: clear water means air, black water means sludge.
Do you use a power flush or a MagnaCleanse?
Both, together. The ThoroughFlush drives cleaning chemical through every radiator while MagnaCleanse magnets in line pull the iron oxide out of the water. Every power flush we do uses both.
How long does a power flush take?
Most of a day for a typical three bedroom house. Larger systems or heavily sludged ones can run longer. We tell you when we quote.
Will a power flush damage my radiators or pipework?
A flush cannot damage sound radiators. It can find weak spots that were already there, usually a radiator corroded from the inside or a joint that has been weeping. Anything like that is shown to you and quoted before we go further.
Do I need a power flush before a new boiler?
Yes, the manufacturer expects a clean system and the guarantee depends on it. Every boiler we install includes a system flush and a Worcester Greenstar magnetic filter in the package, so there is nothing to add.
What is the five year guarantee?
If sludge and cold spots come back within five years of the flush, we flush again free of charge. The condition is an annual boiler service, which keeps the filter clean and the inhibitor topped up.
Can you flush a microbore system?
Yes. Microbore (8mm and 10mm) pipework needs a slower, more careful flush, which is why there is a £75 surcharge. Where microbore is badly blocked, a MagnaCleanse is often the better option.
Do you flush systems with a heat pump?
Yes. Heat pump systems run at lower temperatures and are even more sensitive to sludge, so a clean system and a filter matter more, not less.
Do you cover all of Dalgety Bay?
Yes. We cover the whole of Dalgety Bay (KY11 postcodes), along with Aberdour, Inverkeithing, Rosyth and Hillend. Enter your postcode when you book online and you will see the slots available.
Do I need to be home all day?
Someone needs to let us in at the start and be around at the end so we can show you the clean water test and the radiators working. In between, you are free to get on with your day.
How much is a power flush for a typical Dalgety Bay family house?
£500 covers up to five radiators, then £40 for each extra one. A house with nine radiators would be £660, plus £175 if you want a filter fitted.
My Dalgety Bay radiators are cold in the middle. Is that sludge?
Cold patches in the middle or at the bottom usually are. We can confirm it before quoting a flush.
More questions? See our frequently asked questions, or call the office on 01383 660098.
Homes and heating in Dalgety Bay
Dalgety Bay was built from the 1960s as Scotland's first private new town, on the old Donibristle estate.
Built in phases
Different housebuilders put up the town plot by plot over many years, so neighbouring streets can have quite different layouts and heating systems. We service and repair whatever your house has.
St David's Harbour
The homes around St David's Harbour date from the 1990s, built on the site of the old 1752 coal harbour. We service and repair boilers there of every age.
New homes at Swordfish Drive
New homes on part of the former Donibristle airfield have boilers still inside their manufacturer guarantee, which needs a yearly service by a Gas Safe engineer to stay valid.
Power flushing in Dalgety Bay homes
Many Dalgety Bay houses have had a new boiler fitted to pipework that has been in since the house was built.
Original pipework
Houses from the town's early phases may have pipework that is decades old. Sludge builds up over that time, and a flush clears it before it damages the boiler.
Microbore systems
Some houses here were built with small-bore pipe. Microbore needs extra time to flush properly, which adds £75.
Before a new boiler
If you are replacing an older boiler, flushing first protects the new one and its guarantee.
Guides that might help
Plain answers to the questions we get asked most.
- Is a power flush worth it?
- Do I need a magnetic filter on my boiler?
- Does my radiator need bleeding? Signs and simple fixes
- Why is my boiler making a noise? Causes and fixes
Every price we charge is on Our Rates, VAT included.
Other services in Dalgety Bay
Everything else we do in Dalgety Bay.
- Boiler servicing in Dalgety Bay
- Boiler repairs in Dalgety Bay
- Boiler cover in Dalgety Bay
- New boilers in Dalgety Bay
- Plumbers in Dalgety Bay
- Unvented cylinders in Dalgety Bay
- Smart thermostats in Dalgety Bay
- Landlord gas safety certificates in Dalgety Bay
- Landlord boiler cover in Dalgety Bay
- Heat pump servicing in Dalgety Bay
- Air conditioning in Dalgety Bay
Power flushing in Dalgety Bay and nearby
We cover Dalgety Bay along with Aberdour, Inverkeithing and Rosyth, from our office in Dunfermline. Book online, or see power flushing across Dunfermline and Fife.
Book a power flush in Dalgety Bay
- Book online
- theheatnetwork.co.uk/book
- Phone
- 01383 660098
- Message us a photo
- hello@theheatnetwork.co.uk
- Office
- Scotia House, 5 Dickson Street, Dunfermline, KY12 7SL
- Hours
- Mon to Fri, 9am to 5pm








